Friday, May 9, 2014

HUB AND SPOKE ROUTE SYSTEM
THE DIFFERENCE: HUB AND SPOKE  VS  POINT TO POINT

Point to Point
1.     A Point to Point network is a typical route network where an airline focuses mainly on its Origin and Destination ( O&D ) traffic.
2.     This means that the airline is more interested in transportation of passengers originating from one city ( A ) to another ( B ) and vice versa, but not in connecting passengers between C and B via A.
3.     Low Cost Carriers are considered to be pioneers of this paradigm with a classic example being Southwest Airlines of US.

Hub and Spoke
A Hub and Spoke network is a route network where an airline will not only plan on transporting passengers between two points, but also to connect passengers between two distant cities via its hub.
An example of a Hub and Spoke network can be seen from the following diagram.




 Imagine that as a bicycle wheel, literally. The airline uses the routes from its hub to other cities as spokes to connect each of them via its hub.
The Hub and Spoke model originated with American Airlines, but perhaps the airline that uses it the best in present day is Emirates Airline.
A Hub and Spoke model essentially needs to have different banks of flight departues and arrivals – in order to connect an arrival from city C, with a departure to city B, at the hub A.
This paves way for the airline to attract highly lucrative transit traffic, which at some airline contribute more to fill a flight than O&D traffic.
However, this model is not without its downsides. Keeping flights tightly scheduled to fit this bank might be challenging, and actually operating them on time to provide the connections might be even more challenging.

However, the advantage, as well as the increased use of Hub and Spoke models by competitors have forced not just many legacy full fare carriers but also Low Cost Carriers to embrace a Hub and Spoke model.




Advantages and disadvantages hub and spoke system
  • Advantages of hub-and-spoke
The following two points are the major advantages that the hub-and-spoke system had initially brought to the airline business; however some disadvantages had been developed later due to changes in external environmental factors.
  • Encouraged the rapid growth in the airline business
The hub-and-spoke system since developed after deregulation, has allowed a rapid growth in size, competition strategy and traffic demand in the airline business. However, as suggested by Wells and Younger (2004 4) this had resulted in operational inefficiencies at periods of slow economy; with airlines resulting in very poor financial performances.
As a result of this, some airlines restructure their business model to return to the point-to-point system and move out of the constant need for a large hub, and utilise hubs in a more uniform matter in terms of arrivals and departures. This phenomenon is known as the rolling hubs.
  • Efficient use of scarce transportation resources.
The system has less number of routes connecting all spokes enabling a more efficient use of scarce transportation resources. This however had small airports and economies of smaller regions suffering as per the reduced capacity. As a result this encouraged airports to agree with low cost carriers to offer low airport fees and commissions from local businesses to bring in traffic and passenger flow.
The passenger market favoured this type of airline business as lower fares were rolled out to the market from these smaller hubs; which caused great competition to full service carriers that were operating with large amount of airport fees to use large hubs, and can no longer return to these small hub markets as it is not cost efficient and are dominated by low cost carriers.
Disadvantages of hub-and-spoke
Besides the aforementioned advantages, the hub and spokes system also holds risks for the airlines and the airports which are highlighted in the following sections.
  • Congestion and delays at hub airports
To limit waiting times and provide a large variety of possible connections for passengers at the hub airport, it is essential for the hub airline to schedule as many incoming and outgoing flights as possible during a short time frame. This results in high traffic peaks during these times and often causes delays due to scarce airside facilities such as taxi- or runways.
At the same time the hub-and-spokes-system however allows hub airlines to increase their benefit exponentially by adjoining an additional destination to the network compared to point-to-point-carriers. This implies for a hub airline that usually the trade off between the costs due to congestion and the benefit of serving new markets is positive. Therefore the airline has an incentive for adding more traffic despite a rising congestion level. The point-to-point carriers at the airport which cannot capitalize on such an exponential benefit however suffer from the increasing number of flights .

Another reason for congestion stems from the fact that many airports do not limit the number of take-offs and landings. One possibility for airlines to prevent further congestion and coevally increasing the passenger count is the use of larger (feeder) aircraft. However, doing so, new challenges occur if these aircraft with more passengers are delayed. More travelers will miss their connecting flights which would result in a poor utilization rate of the hub-hub connection and reduces the profitability of a carrier. This problem is especially critical for the operations of the A380 .
  • Discontinuous use of airport facilities
The merging of traffic in a hub-and-spoke-system implies a traffic structure consisting of high peaks at certain times a day when airport facilities are highly in use. At some airports, costly additional capacity and infrastructure (e.g. runways) are required to cater for the demands at these peaks. During off-peak hours, as traffic is less, terminal and airside facilities are used inefficiently or even idle. The temporal discrepancy between capacity and demand will continuously result in either congestion and delays or underutilization .
  • Airport dependency

Hub airlines and the corresponding alliances have selected a limited number of airports on each continent through which they route their traffic. For these few hub airports in turn, they represent a high share of their business. As airport capacity is limited and usually not sufficient for other extensive networks, and the necessary slots at attractive times are not available, other airlines tend to chose alternative options.
For the airport, this dependency on one major hub airline has advantages and disadvantages: as long as the airline is stable and successful in the market the airport can be sure of a consistent operation and therewith a steady income stream. As soon as the airline however struggles, this will have negative repercussions on the airport and might severely jeopardize (profitable) operations at the airport .
BILL OF LADING (B/L)
A document issued by a carrier, or its agent, to the shipper as a contract of carriage of goods. It is also a receipt for cargo accepted for transportation, and must be presented for taking delivery at the destination.
Among other items of information, a bill of lading contains
  1. consignor's and consignee's name,
  2. names of the ports of departure and destination,
  3. name of the vessel, 
  4.  dates of departure and arrival,
  5. itemized list of goods being transported with number of packages and kind of packaging,
  6.  marks and numbers on the packages, 
  7. weight and/or volume of the cargo,
  8. freight rate and amount.

It serves as a proof of ownership (title) of the cargo, and may be issued either in a negotiable or non-negotiable form. In negotiable form, it is commonly used in letter of credit transactions, and may be bought, sold, or traded; or used as security for borrowing money. A bill of lading is required in all claims for compensation for any damage, delay, or loss; and for the resolution of disputes regarding ownership of the cargo. The rights, responsibilities, and liabilities of the carrier and the shipper under a bill of lading (often printed on its back) are governed generally either by the older Hague rules, or by the more recent Hague-Visby rules. See also lading.



Thursday, May 8, 2014

MODES OF TRANSPORTATION IN LOGISTICS

Logistics refer to the movement of raw materials, finished goods and related information from the point of origin to the point of consumption in order to meet customer satisfaction. Different modes of transportation like road, rail, water and air can be used for the effective management of merchandise. Every mode of transportation requires a different set of infrastructure, type of vehicles, technological solutions and regulations. All have different costs, service and transit times.

ROAD
Road transportation is one of the most basic and historical means of transportation from one place to another. There are many different types of automobiles found on roads, although trucks and carriers typically are used for carrying or delivering freight. Road transportation incurs a relatively lower cost than other logistic forms and has a widely recognizable and flexible route. However, transport by road takes a relatively longer period of time than other possible means of transportation, and it offers a limited capacity. Road transport is most often used for relatively inexpensive, non-perishable items or for shorter distances.





RAIL
Rail transport uses freight trains for the delivery of merchandise. Freight trains are usually powered by diesel, electricity and steam. Since the late 1900s container trains were considered to be the dominant solution for bulk quantities of freight, but as they lack the flexibility of road transport and incur an additional transshipment cost, this logistics method has become a little less popular in recent times. However, using rail transport can be less expensive if freight is large and heavy and the pickup point as well as the delivery point is near the rail head.





WATER
Water transport uses ships and large commercial vessels that carry billions of tons of cargo every year. Developed in the 18th century, steam engines have been a long favorite choice for making ships move, although now a little more refined type of petroleum referred to as bunker fuel is used instead. Sea, lake or river transport is particularly effective for significantly large quantities of goods that are non-perishable in nature and for cities or states that have water access. Moreover, transport via water is considerably less expensive than other logistics methods, which makes it one of the most widely used choices of transport for merchandise.




AIR
Merchandise is carried in cargo holds within passenger airlines and/or via aircraft designed to carry freight alone. Although air transport is more expensive than all other means of transportation, it is undeniably most time-efficient. Perishable merchandise like fruits and vegetables are mostly sent by air.




PIPELINES
Pipelines transport crude oil and raw natural gas over long distances from producing regions of Canada to refineries and processing plants, where these energy sources are converted into useful fuels, such as gasoline, diesel and commercial-grade natural gas. Pipelines are also used to transport these consumer-ready fuels from refineries and gas processing plants to large terminals on the edge of towns and cities, where they can then be distributed to homes and businesses. Pipelines consist of pipe, as well as related equipment. Compressors or pumps keep the gases and liquids flowing through pipelines, while valves control the flow and keep things running smoothly.












THE IMPORTANCE OF TRANSPORTATION IN SUPPLY CHAIN

ROLE OF TRANSPORTATION
Transportation refers to the movement of product from one location to another as it makes it way form the beginning of a supply chain driver because products are rarely produced and consumed in the same location. Transportation is a significant component of the costs incurred by most supply chains. The role of transportation is even more significant in global supply chains.          
International trade is becoming a bigger part of the world's economic activity. Any supply chains success is closely linked to the appropriate use of transportation. Supply chain also use responsive transportation to centralize inventories and operate with fewer facilities. To understand the transportation in a supply chain it is important to consider the perspective of all four parties. A carrier makes investment decisions regarding the transportation equipment (locomotives, trucks, airplanes, etc) and in some cases infrastructure (rail) and then makes operating decisions to try to maximize the return from these assets. A shipper, in contrast uses transportation to minimize the total cost (transportation, inventory, information, sourcing and facility) while providing an appropriate level of responsiveness to the customer.


INCOTERMS (INTERNATIONAL COMMERCIAL TERMS)

WHAT IS INCOTERMS?
Trade terms published by the International Chamber of Commerce (ICC) that are commonly used in both international and domestic trade contracts. Incoterms, short for "International Commercial Terms," are used to make international trade easier by helping traders in different countries understand one another.

THE PURPOSE OF USING THE INCOTERMS
To make sure buyer or seller knows:
  • who is responsible for the cost of transporting the goods, including insurance, taxes and dutieS
  •  where the goods should be picked up from and transported to
  • who is responsible for the goods at each step during transportation.

RULES FOR ANY MODE OR MODES OF TRANSPORT
  • Ex Works (EXW)
“Ex Works” means that the seller delivers when it places the goods at the disposal of the buyer at the seller’s premises or at another named place (i.e.,works, factory, warehouse, etc.). The seller does not need to load the goods on any collecting vehicle, nor does it need to clear the goods for export, where such clearance is applicable
  • Free Carrier (FCA)
“Free Carrier” means that the seller delivers the goods to the carrier or another person nominated by the buyer at the seller’s premises or another named place. The parties are well advised to specify as clearly as possible the point within the named place of delivery, as the risk passes to the buyer at that point
  •  Carriage Paid To (CPT)
“Carriage Paid To” means that the seller delivers the goods to the carrier or another person nominated by the seller at an agreed place (if any such place is agreed between parties) and that the seller must contract for and pay the costs of carriage necessary to bring the goods to the named place of destination.
  •  Carriage And Insurance Paid To (CIP)
“Carriage and Insurance Paid to” means that the seller delivers the goods to the carrier or another person nominated by the seller at an agreed place (if any such place is agreed between parties) and that the seller must contract for an pay the costs of carriage necessary to bring the goods to the named place of destination.
‘The seller also contracts for insurance cover against the buyer’s risk of loss of or damage to the goods during the carriage. The buyer should note that under CIP the seller is required to obtain insurance only on minimum cover. Should the buyer wish to have more insurance protection, it will need either to agree as much expressly with the seller or to make its own extra insurance arrangements.”
  • Delivered At Terminal (DAT)
“Delivered at Terminal” means that the seller delivers when the goods, once unloaded from the arriving means of transport, are placed at the disposal of the buyer at a named terminal at the named port or place of destination. “Terminal” includes a place, whether covered or not, such as a quay, warehouse, container yard or road, rail or air cargo terminal. The seller bears all risks involved in bringing the goods to and unloading them at the terminal at the named port or place of destination
  • Delivered At Place (DAP)
“Delivered at Place” means that the seller delivers when the goods are placed at the disposal of the buyer on the arriving means of transport ready for unloading at the named place of destination. The seller bears all risks involved in bringing the goods to the named place.
  •   Delivered Duty Paid (DDP)
“Delivered Duty Paid” means that the seller delivers the goods when the goods are placed at the disposal of the buyer, cleared for import on the arriving means of transport ready for unloading at the named place of destination. The seller bears all the costs and risks involved in bringing the goods to the place of destination and has an obligation to clear the goods not only for export but also for import, to pay any duty for both export and import and to carry out all customs formalities.

RULES FOR SEA AND INLAND WATERWAY TRANSPORT
  • Free Alongside Ship (FAS)
“Free Alongside Ship” means that the seller delivers when the goods are placed alongside the vessel (e.g., on a quay or a barge) nominated by the buyer at the named port of shipment. The risk of loss of or damage to the goods passes when the goods are alongside the ship, and the buyer bears all costs from that moment onwards
  • Free On Board (FOB)
“Free On Board” means that the seller delivers the goods on board the vessel nominated by the buyer at the named port of shipment or procures the goods already so delivered. The risk of loss of or damage to the goods passes when the goods are on board the vessel, and the buyer bears all costs from that moment onwards.
  •  Cost and Freight (CFR)
“Cost and Freight” means that the seller delivers the goods on board the vessel or procures the goods already so delivered. The risk of loss of or damage to the goods passes when the goods are on board the vessel. the seller must contract for and pay the costs and freight necessary to bring the goods to the named port of destination.
  • Cost, Insurance and Freight (CIF)
“Cost, Insurance and Freight” means that the seller delivers the goods on board the vessel or procures the goods already so delivered. The risk of loss of or damage to the goods passes when the goods are on board the vessel. The seller must contract for and pay the costs and freight necessary to bring the goods to the named port of destination.

‘The seller also contracts for insurance cover against the buyer’s risk of loss of or damage to the goods during the carriage. The buyer should note that under CIF the seller is required to obtain insurance only on minimum cover. Should the buyer wish to have more insurance protection, it will need either to agree as much expressly with the seller or to make its own extra insurance arrangements.”
WHAT IS KANBAN SYSTEM?
A kanban system is a work scheduling system that maximizes the productivity of a team by reducing idle time. Idle time can occur within any process, workflow or procedure and can usually be traced back to opportunities within the process itself. But how can a team measure idle time and trace it back to a lapse in process?

KANBAN TOOLS HELP TO MAXIMIZE TIME AND RESOURCES

A good kanban tool goes a long way in helping teams understand how their time is being spent. Most online kanban tools provide tracking and productivity data that helps people easily identify problem areas. Once they have a better idea of where the problems lie, teams can begin to develop solutions to those problems. Maybe one team member is severely overworked, while another doesn’t have enough to fill his day. In this instance, a manager would help delegate tasks to team members with more bandwidth, alleviating the pressure from the overworked individual and removing the impediment for the entire team.
Another way in which a Kanban system helps to maximize resources lies in the ability to continuously deliver products while continuously improving the process required to get there. Software development teams, accounting teams, finance teams and even creative agencies have adopted the use of the kanban system, despite its lack of emphasis on due dates. By delivering products continuously, customers gain the benefits of using those products sooner and the ability to make modifications based on new information that has become available since the start of the last project phase.

ADVANTAGES OF USING THE KANBAN SYSTEM

There are many advantages to using the kanban system as a way to manage work, including:
  • Flexibility
  • Focus on continuous delivery
  •  Reduction of wasted work / wasted time
  • Increased productivity
  •  Increased efficiency
  • Team members’ ability to focus

THE KANBAN PULL SYSTEM

Kanban is considered a pull system. In a pull system, work items are pulled into the queue by the people doing the work as they complete tasks in order of priority. Kanban enables the delivery of work as it becomes available and as part of a Minimum Viable Product (MVP) that is sometimes defined in the business requirements. Another term for Minimum Viable Product (MVP) is Minimum Marketable Features (MMF), a term used to describe the work that can be delivered which meets the business requirements without exceeding them. This way, the amount of wasted work is minimized while delivering the product as specified in the customer’s business requirements.


Wednesday, May 7, 2014

Issues and Challenges in Transport Geography

1.                CONGESTION

The issue of congestion is likely to remain as one of great issues in transport geography because there are unprecedented demands for transportation being generated by a global economy that is ever more dependent upon the transport industry. Congestion occurs across modes and locations and arises from two causes. Most important is when demand for mobility exceeds the capacity. It can also occur when random events bring about a temporary disruption to service, such as an accident or a natural hazard such as flooding. In the case of the second causes, it is possible to mitigate their effects if the occurrence is frequent, such as accidents, or if the risks are great, as for example of flooding in a flood plain. A common and attractive solution is to increase capacity. Furthermore, demand is increasing ceaselessly.
The expected growth of the demand is likely to have major impacts on the nature and form of the future transport industry. In the short term at least, road transport is likely to continue its dominance of the transport industry. There are two basic reasons for this assertion. In the developed world automobiles and trucks already dominate the market, and the spatial patterns of people, industries and services have adjusted themselves somewhat to the demands of these modes. Such low density, space extensive patterns are pushing the traffic congestion ever further out, and make it very difficult for other higher capacity modes to compete. At the same time the demand for mobility is growing as a result of the rapid industrialization in developing countries such as China and India. There too a modal shift is occurring in favor of road transport. Increasing prosperity in these countries represents a great potential for growth in road transport.
Congestion is not limited to internal urban-generated traffic. International trade is likely to continue to be dominated by maritime transport (in terms of weight) and air transport (in terms of value). This has already led to a concentration of traffic a relatively small number of gateways and hubs, which are capable of extracting scale economies. For example, the 20 largest container ports handled more than 49% of global traffic in 2010. The traffic concentration however is already producing capacity problems in many of these hubs. International trade has grown at a rate faster than economic growth as measured by the GDP in recent decades and there are expectations that hub congestion will remain an issue in the future.
Congestion is a phenomenon that is spatially bound. It takes place in specific locations with impacts at a multitude of scales, from a particular highway intersection that may delay traffic over a few hundred meters, to blockage in a port that may disrupt the flow of goods over half a continent. Each event produces a spatial response, from the car driver who searches out an alternative route to the shipper who selects a different mode or point of entry for succeeding shipments. Increased demand and the rising likelihoods of congestion will intensify new spatial responses and thus it appears very likely that new spatial flows and structures will come into being. They involve:
  •  Demand management: Concerns the conditions and in what types of locations can travel demand be modified. In a market context, when supply is fixed and demand increases, an upward price adjustment inevitably takes place. This is common in maritime and air transport with yield management strategies. However, many transport infrastructures, such as roads, are provided free of access, implying no cost changes as congestion levels increase. There is thus a growing need to provide incentives (or disincentives) and reassess the priority in the use of infrastructure, particularly in urban areas.
  • Concentration versus deconcentration: Accessibility and infrastructure improvements usually lead to a concentration of activities, while congestion acts as a counteracting force to concentration since it creates various diseconomies. Already there is evidence of deconcentration in air transport for growth in passengers and freight in some smaller airports. The density of economic and social activities and the related intensity of transport use imply a balance between the forces of concentration and deconcentration.
  • Economic and social impacts: In a context where transport networks are increasingly synchronized congestion can create multiplying effects not just impacting costs, but also the reliability of transport systems. The economic and social impacts of congestion remain a salient issue, particularly in developing countries where it can impede economic growth.
  • Passengers versus freight: Congestion also raises the issue of the prioritization of passengers versus freight when they share transport infrastructure or when freight activities such as terminals or distribution centers are in proximity to locations where large numbers of passengers transit. This will require a careful assessment of the respective costs of congestion on specific passenger and freight transport systems and in which circumstances congestion exerts the most externalities. A salient issue concerns how freight distribution could be better integrated in the urban environment where passenger movements tend to dominate; the realm of city logistics.


2.                INFRASTRUCTURE

Regardless of the specific solutions to congestion that are considered, increasing demand is placing unprecedented requests for investments on transport infrastructures. A major question confronting all countries around the world is how to finance the construction and maintenance of transport infrastructures. As economies of scale are applied to transport systems, such as larger containerships or doublestacked rail corridors, capital requirements increase in proportion. Governments have traditionally been the primary source of funding in the transport sector, but the costs of keeping pace with the growth in demand are making it difficult for even the richest countries to countenance public funding on the scale required to meet expectations about the mobility of passengers and freight.
Capital requirements are particularly prevalent on both sides of the infrastructure life cycle spectrum. Over this matter the highways in China and North America represent two salient cases. For China, the last decade has seen an impressive level of highway construction with the setting of a national highway network which totaled more than 85,000 km in 2012, the longest in the world. Comparatively, the American Interstate highway system of about 75,000 km is nearing a phase in its life cycle where a substantial amount of capital investment will be required to upgrade the system and maintain its operability, including thousands of aging highway bridges. While most of the Interstate is publicly funded, almost all Chinese highways were funded by private interests that are using tolls to recover their investments. Irrespective of the context, the issue of the role of private and public actors in transport infrastructure as well as pricing mechanisms will remain salient:

  •  Public-private partnerships and completely private solutions are one set of solutions. For many developing countries this is the only solution, since public finances are inadequate to the task. Thus, in the future, a greater private involvement in the provision of transport infrastructure is to be expected. Several models are already well tested: BOT (Build-Operate-Transfer), where the private sector builds and operates a facility or system for a period of time, but then transfers it back to the government after an agreed period; BLT (Build-Lease-Transfer) where after building the facilities, it is leased for a fixed period for operation, and finally transferred back; ROT (Rehabilitate-Operate-Transfer) where the private party refurbishes an existing facility to be operated for a term prior to be turned back to the state.
  • Pricing. Another approach that is gaining momentum is charging for use of transport infrastructure. Several segments of the transport system are privately owned and operated such as maritime shipping and air transportation implying that pricing is generally set by market forces. Still, many transport infrastructures such are roads and airports are wholly or partially owned by the public sector. Pricing is becoming an important feature of transport planning in urban areas where common use transport infrastructures are under stress. Whether it is cordon pricing, congestion pricing, or tolling, drivers are being forced to pay for their use of roads and limited price elasticity has been observed so far. With the growing concerns over the environment, charging for the externalities of transport modes is becoming a reality in many jurisdictions. It remains to be seen about how effective these alternatives are and their effects on travel behavior.

The difficulties are not to be underestimated, however. Most transport infrastructure projects are long term, but are typified by the heaviest capital investment requirements being incurred over a short initial phase. Even if transport infrastructure can be built in phases most private enterprises cannot take a long term perspective, because they need to cover their expenses and recover their capital investments over short periods of time. With the growing unwillingness or inability of the public sector to fund and provide transport infrastructure, new forms of infrastructure provision, maintenance and operation need to be achieved. This is where the financial sector, particularly long term investment funds (such as pension funds) can be involved with a better synchronism between capital and time horizons of transport infrastructure projects.

3.                SUSTAINABILITY CHALLENGES

The issue of sustainability has become an increasing important consideration for the transport industry. It is now broadly recognized that there needs to be a balance between economic efficiency, social factors and the environment. Of these three, the issue of economic efficiency has always been to the forefront, and governments have been important in regulating social conditions (safety, security, and working conditions). Despite the strong historic relationships between transport and the environment, the latter has tended to be overlooked by the industry. This is changing, and environmental issues are likely to play an ever more important role in the transport industry, particularly over four core dimensions:
  • Transport and climate change. Transportation both influences and is impacted by climate change. Transport activities, particularly vehicles, account for 24% of CO2 emissions worldwide. They are thus subject to regulatory pressures to improve their environmental performance in regard to the greenhouse gases they emit. Concomitantly, transportation activities can be negatively impacted by climate change. Severe weather occurrences have a disruptive effect on transport systems, particularly for air transportation which has become a crucial element of global and regional mobility. Potential impacts on infrastructure need to be assessed since infrastructures are built with an expected life cycle and climate change may reduce it or increase maintenance costs. The prospects of sea level rises are particularly problematic for coastal transport systems. The extent to which climate change is influenced by and will impact global transport systems, for modes and terminals, needs to be seriously considered.
  •  Transport and atmospheric pollution. Air quality standards are being implemented with increasing rigor in more and more countries around the world. There are still striking differences between regions and between the modes. For example, most of the countries of the developing world still have to go a long way to fixing and enforcing standards. However, the trend is towards greater control over emissions, which will have effects on modes and their respective competitiveness, particularly if a mode is subject to a greater degree of legislation than another.
  •  Transport and water quality. The contribution of transport to the pollution of rivers and oceans is considerable, and is only recently being addressed by international legislation. Considerable progress has been made in a number of areas such as ballast water, waste and oil spills. As legislations increase in its comprehensiveness, the more the transport industry is impacted. This is particularly evident in matters relating to dredging, where environmental constraints are placing a growing financial burden on ports that are seeking to deepen channels in order to keep pace with the growth of vessels size. It can be expected that these constraints may impact port competitiveness, particularly in light of the pressures to dredge to keep up with the growth in vessel size.
  •  Transport and land take. Increased demand for transport is already placing enormous pressures for new infrastructures. Many of these transport facilities such as airports and ports require very large amounts of land for their own internal operations and for the external transport links that have to be provided. Rapid motorization in developing countries has resulted in the conversion of land to provide road infrastructure. This expanded scale of transport infrastructure questions the capacity of environmental systems to mitigate the disruptions and will likely have an impact on how transport infrastructure is designed.